Tammy Logo

Upgrade Your BMW Tailgate: A Step-by-Step Guide

Learn how to wire and code the new tailgate for the upgrade on your BMW 116i, 118i, or m135i model. Find out the tools needed and the process for upgrading the rear and front end of your car.

Wiring and Coding the Tailgate Upgrade

βš™οΈThe video demonstrates how to wire and code the new tailgate for the upgrade.

πŸ”§Tools needed include T20 and T30 Torx bit, number eight and ten socket, and a coding computer.

πŸš—The upgrade is applicable to BMW 116i, 118i, and m135i models.

Upgrading the Rear and Front End

πŸ”ŒThe tailgate lights and bumper on a pre-facelift car need to be rewired to work with a facelift model.

πŸ”To upgrade the rear end, the REM module needs to be re-flashed and the rare boot lights need to be replaced.

πŸ’‘New power cables and wires for high can and low can need to be installed for the LCR headlights.

FAQ

What tools do I need for the upgrade?

You will need T20 and T30 Torx bit, number eight and ten socket, and a coding computer.

Is the upgrade compatible with all BMW models?

The upgrade is applicable to BMW 116i, 118i, and m135i models.

Do I need to re-flash the REM module for the rear end upgrade?

Yes, the REM module needs to be re-flashed for the rear end upgrade.

What do I need to install for the LCR headlights?

You will need to install new power cables and wires for high can and low can for the LCR headlights.

How do I code the headlights after the upgrade?

The process involves saving the new vehicle order and accessing the car's module system. Two new modules for the LED headlights should appear after rescanning the car. The headlights need to be coded, and once done, they should work successfully.

Summary with Timestamps

πŸš— 00:00The video shows how to upgrade a BMW 116i/118i/m135i from preface lift to facelift version.
πŸ”§ 3:40The video demonstrates how to rewire the pins on a pre-facelift car to make the tailgate lights and bumper work with a facelift model.
πŸ”§ 6:34The video explains how to upgrade the rear and front end of a car, including re-flashing the REM module and replacing headlights and bumper.
πŸ’‘ 10:08The video provides instructions on how to route and connect wires in a car fuse box.

Browse More Automotive Video Summaries

Upgrade Your BMW Tailgate: A Step-by-Step GuideAutomotiveCar Customization
Video thumbnailYouTube logo
A summary and key takeaways of the above video, "Bmw LCI Facelift FRONT & REAR Conversion | How To Facelift A Bmw F20/21| Fitting, Wiring & Coding" are generated using Tammy AI
4.62 (16 votes)